Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 244 | chris | 1 | /* |
| 2 | * jidctred.c |
||
| 3 | * |
||
| 4 | * Copyright (C) 1994-1998, Thomas G. Lane. |
||
| 5 | * This file is part of the Independent JPEG Group's software. |
||
| 6 | * For conditions of distribution and use, see the accompanying README file. |
||
| 7 | * |
||
| 8 | * This file contains inverse-DCT routines that produce reduced-size output: |
||
| 9 | * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block. |
||
| 10 | * |
||
| 11 | * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M) |
||
| 12 | * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step |
||
| 13 | * with an 8-to-4 step that produces the four averages of two adjacent outputs |
||
| 14 | * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output). |
||
| 15 | * These steps were derived by computing the corresponding values at the end |
||
| 16 | * of the normal LL&M code, then simplifying as much as possible. |
||
| 17 | * |
||
| 18 | * 1x1 is trivial: just take the DC coefficient divided by 8. |
||
| 19 | * |
||
| 20 | * See jidctint.c for additional comments. |
||
| 21 | */ |
||
| 22 | |||
| 23 | #define JPEG_INTERNALS |
||
| 24 | #include "jinclude.h" |
||
| 25 | #include "jpeglib.h" |
||
| 26 | #include "jdct.h" /* Private declarations for DCT subsystem */ |
||
| 27 | |||
| 28 | #ifdef IDCT_SCALING_SUPPORTED |
||
| 29 | |||
| 30 | |||
| 31 | /* |
||
| 32 | * This module is specialized to the case DCTSIZE = 8. |
||
| 33 | */ |
||
| 34 | |||
| 35 | #if DCTSIZE != 8 |
||
| 36 | Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ |
||
| 37 | #endif |
||
| 38 | |||
| 39 | |||
| 40 | /* Scaling is the same as in jidctint.c. */ |
||
| 41 | |||
| 42 | #if BITS_IN_JSAMPLE == 8 |
||
| 43 | #define CONST_BITS 13 |
||
| 44 | #define PASS1_BITS 2 |
||
| 45 | #else |
||
| 46 | #define CONST_BITS 13 |
||
| 47 | #define PASS1_BITS 1 /* lose a little precision to avoid overflow */ |
||
| 48 | #endif |
||
| 49 | |||
| 50 | /* Some C compilers fail to reduce "FIX(constant)" at compile time, thus |
||
| 51 | * causing a lot of useless floating-point operations at run time. |
||
| 52 | * To get around this we use the following pre-calculated constants. |
||
| 53 | * If you change CONST_BITS you may want to add appropriate values. |
||
| 54 | * (With a reasonable C compiler, you can just rely on the FIX() macro...) |
||
| 55 | */ |
||
| 56 | |||
| 57 | #if CONST_BITS == 13 |
||
| 58 | #define FIX_0_211164243 ((INT32) 1730) /* FIX(0.211164243) */ |
||
| 59 | #define FIX_0_509795579 ((INT32) 4176) /* FIX(0.509795579) */ |
||
| 60 | #define FIX_0_601344887 ((INT32) 4926) /* FIX(0.601344887) */ |
||
| 61 | #define FIX_0_720959822 ((INT32) 5906) /* FIX(0.720959822) */ |
||
| 62 | #define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ |
||
| 63 | #define FIX_0_850430095 ((INT32) 6967) /* FIX(0.850430095) */ |
||
| 64 | #define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ |
||
| 65 | #define FIX_1_061594337 ((INT32) 8697) /* FIX(1.061594337) */ |
||
| 66 | #define FIX_1_272758580 ((INT32) 10426) /* FIX(1.272758580) */ |
||
| 67 | #define FIX_1_451774981 ((INT32) 11893) /* FIX(1.451774981) */ |
||
| 68 | #define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ |
||
| 69 | #define FIX_2_172734803 ((INT32) 17799) /* FIX(2.172734803) */ |
||
| 70 | #define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ |
||
| 71 | #define FIX_3_624509785 ((INT32) 29692) /* FIX(3.624509785) */ |
||
| 72 | #else |
||
| 73 | #define FIX_0_211164243 FIX(0.211164243) |
||
| 74 | #define FIX_0_509795579 FIX(0.509795579) |
||
| 75 | #define FIX_0_601344887 FIX(0.601344887) |
||
| 76 | #define FIX_0_720959822 FIX(0.720959822) |
||
| 77 | #define FIX_0_765366865 FIX(0.765366865) |
||
| 78 | #define FIX_0_850430095 FIX(0.850430095) |
||
| 79 | #define FIX_0_899976223 FIX(0.899976223) |
||
| 80 | #define FIX_1_061594337 FIX(1.061594337) |
||
| 81 | #define FIX_1_272758580 FIX(1.272758580) |
||
| 82 | #define FIX_1_451774981 FIX(1.451774981) |
||
| 83 | #define FIX_1_847759065 FIX(1.847759065) |
||
| 84 | #define FIX_2_172734803 FIX(2.172734803) |
||
| 85 | #define FIX_2_562915447 FIX(2.562915447) |
||
| 86 | #define FIX_3_624509785 FIX(3.624509785) |
||
| 87 | #endif |
||
| 88 | |||
| 89 | |||
| 90 | /* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. |
||
| 91 | * For 8-bit samples with the recommended scaling, all the variable |
||
| 92 | * and constant values involved are no more than 16 bits wide, so a |
||
| 93 | * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. |
||
| 94 | * For 12-bit samples, a full 32-bit multiplication will be needed. |
||
| 95 | */ |
||
| 96 | |||
| 97 | #if BITS_IN_JSAMPLE == 8 |
||
| 98 | #define MULTIPLY(var,const) MULTIPLY16C16(var,const) |
||
| 99 | #else |
||
| 100 | #define MULTIPLY(var,const) ((var) * (const)) |
||
| 101 | #endif |
||
| 102 | |||
| 103 | |||
| 104 | /* Dequantize a coefficient by multiplying it by the multiplier-table |
||
| 105 | * entry; produce an int result. In this module, both inputs and result |
||
| 106 | * are 16 bits or less, so either int or short multiply will work. |
||
| 107 | */ |
||
| 108 | |||
| 109 | #define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) |
||
| 110 | |||
| 111 | |||
| 112 | /* |
||
| 113 | * Perform dequantization and inverse DCT on one block of coefficients, |
||
| 114 | * producing a reduced-size 4x4 output block. |
||
| 115 | */ |
||
| 116 | |||
| 117 | GLOBAL(void) |
||
| 118 | jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, |
||
| 119 | JCOEFPTR coef_block, |
||
| 120 | JSAMPARRAY output_buf, JDIMENSION output_col) |
||
| 121 | { |
||
| 122 | INT32 tmp0, tmp2, tmp10, tmp12; |
||
| 123 | INT32 z1, z2, z3, z4; |
||
| 124 | JCOEFPTR inptr; |
||
| 125 | ISLOW_MULT_TYPE * quantptr; |
||
| 126 | int * wsptr; |
||
| 127 | JSAMPROW outptr; |
||
| 128 | JSAMPLE *range_limit = IDCT_range_limit(cinfo); |
||
| 129 | int ctr; |
||
| 130 | int workspace[DCTSIZE*4]; /* buffers data between passes */ |
||
| 131 | SHIFT_TEMPS |
||
| 132 | |||
| 133 | /* Pass 1: process columns from input, store into work array. */ |
||
| 134 | |||
| 135 | inptr = coef_block; |
||
| 136 | quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; |
||
| 137 | wsptr = workspace; |
||
| 138 | for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { |
||
| 139 | /* Don't bother to process column 4, because second pass won't use it */ |
||
| 140 | if (ctr == DCTSIZE-4) |
||
| 141 | continue; |
||
| 142 | if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && |
||
| 143 | inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 && |
||
| 144 | inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) { |
||
| 145 | /* AC terms all zero; we need not examine term 4 for 4x4 output */ |
||
| 146 | int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; |
||
| 147 | |||
| 148 | wsptr[DCTSIZE*0] = dcval; |
||
| 149 | wsptr[DCTSIZE*1] = dcval; |
||
| 150 | wsptr[DCTSIZE*2] = dcval; |
||
| 151 | wsptr[DCTSIZE*3] = dcval; |
||
| 152 | |||
| 153 | continue; |
||
| 154 | } |
||
| 155 | |||
| 156 | /* Even part */ |
||
| 157 | |||
| 158 | tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); |
||
| 159 | tmp0 <<= (CONST_BITS+1); |
||
| 160 | |||
| 161 | z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); |
||
| 162 | z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); |
||
| 163 | |||
| 164 | tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865); |
||
| 165 | |||
| 166 | tmp10 = tmp0 + tmp2; |
||
| 167 | tmp12 = tmp0 - tmp2; |
||
| 168 | |||
| 169 | /* Odd part */ |
||
| 170 | |||
| 171 | z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); |
||
| 172 | z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); |
||
| 173 | z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); |
||
| 174 | z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); |
||
| 175 | |||
| 176 | tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ |
||
| 177 | + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ |
||
| 178 | + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ |
||
| 179 | + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ |
||
| 180 | |||
| 181 | tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ |
||
| 182 | + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ |
||
| 183 | + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ |
||
| 184 | + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ |
||
| 185 | |||
| 186 | /* Final output stage */ |
||
| 187 | |||
| 188 | wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1); |
||
| 189 | wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1); |
||
| 190 | wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1); |
||
| 191 | wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1); |
||
| 192 | } |
||
| 193 | |||
| 194 | /* Pass 2: process 4 rows from work array, store into output array. */ |
||
| 195 | |||
| 196 | wsptr = workspace; |
||
| 197 | for (ctr = 0; ctr < 4; ctr++) { |
||
| 198 | outptr = output_buf[ctr] + output_col; |
||
| 199 | /* It's not clear whether a zero row test is worthwhile here ... */ |
||
| 200 | |||
| 201 | #ifndef NO_ZERO_ROW_TEST |
||
| 202 | if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && |
||
| 203 | wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { |
||
| 204 | /* AC terms all zero */ |
||
| 205 | JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) |
||
| 206 | & RANGE_MASK]; |
||
| 207 | |||
| 208 | outptr[0] = dcval; |
||
| 209 | outptr[1] = dcval; |
||
| 210 | outptr[2] = dcval; |
||
| 211 | outptr[3] = dcval; |
||
| 212 | |||
| 213 | wsptr += DCTSIZE; /* advance pointer to next row */ |
||
| 214 | continue; |
||
| 215 | } |
||
| 216 | #endif |
||
| 217 | |||
| 218 | /* Even part */ |
||
| 219 | |||
| 220 | tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1); |
||
| 221 | |||
| 222 | tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065) |
||
| 223 | + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865); |
||
| 224 | |||
| 225 | tmp10 = tmp0 + tmp2; |
||
| 226 | tmp12 = tmp0 - tmp2; |
||
| 227 | |||
| 228 | /* Odd part */ |
||
| 229 | |||
| 230 | z1 = (INT32) wsptr[7]; |
||
| 231 | z2 = (INT32) wsptr[5]; |
||
| 232 | z3 = (INT32) wsptr[3]; |
||
| 233 | z4 = (INT32) wsptr[1]; |
||
| 234 | |||
| 235 | tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ |
||
| 236 | + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ |
||
| 237 | + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ |
||
| 238 | + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ |
||
| 239 | |||
| 240 | tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ |
||
| 241 | + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ |
||
| 242 | + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ |
||
| 243 | + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ |
||
| 244 | |||
| 245 | /* Final output stage */ |
||
| 246 | |||
| 247 | outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2, |
||
| 248 | CONST_BITS+PASS1_BITS+3+1) |
||
| 249 | & RANGE_MASK]; |
||
| 250 | outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2, |
||
| 251 | CONST_BITS+PASS1_BITS+3+1) |
||
| 252 | & RANGE_MASK]; |
||
| 253 | outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0, |
||
| 254 | CONST_BITS+PASS1_BITS+3+1) |
||
| 255 | & RANGE_MASK]; |
||
| 256 | outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0, |
||
| 257 | CONST_BITS+PASS1_BITS+3+1) |
||
| 258 | & RANGE_MASK]; |
||
| 259 | |||
| 260 | wsptr += DCTSIZE; /* advance pointer to next row */ |
||
| 261 | } |
||
| 262 | } |
||
| 263 | |||
| 264 | |||
| 265 | /* |
||
| 266 | * Perform dequantization and inverse DCT on one block of coefficients, |
||
| 267 | * producing a reduced-size 2x2 output block. |
||
| 268 | */ |
||
| 269 | |||
| 270 | GLOBAL(void) |
||
| 271 | jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, |
||
| 272 | JCOEFPTR coef_block, |
||
| 273 | JSAMPARRAY output_buf, JDIMENSION output_col) |
||
| 274 | { |
||
| 275 | INT32 tmp0, tmp10, z1; |
||
| 276 | JCOEFPTR inptr; |
||
| 277 | ISLOW_MULT_TYPE * quantptr; |
||
| 278 | int * wsptr; |
||
| 279 | JSAMPROW outptr; |
||
| 280 | JSAMPLE *range_limit = IDCT_range_limit(cinfo); |
||
| 281 | int ctr; |
||
| 282 | int workspace[DCTSIZE*2]; /* buffers data between passes */ |
||
| 283 | SHIFT_TEMPS |
||
| 284 | |||
| 285 | /* Pass 1: process columns from input, store into work array. */ |
||
| 286 | |||
| 287 | inptr = coef_block; |
||
| 288 | quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; |
||
| 289 | wsptr = workspace; |
||
| 290 | for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { |
||
| 291 | /* Don't bother to process columns 2,4,6 */ |
||
| 292 | if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6) |
||
| 293 | continue; |
||
| 294 | if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 && |
||
| 295 | inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) { |
||
| 296 | /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */ |
||
| 297 | int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; |
||
| 298 | |||
| 299 | wsptr[DCTSIZE*0] = dcval; |
||
| 300 | wsptr[DCTSIZE*1] = dcval; |
||
| 301 | |||
| 302 | continue; |
||
| 303 | } |
||
| 304 | |||
| 305 | /* Even part */ |
||
| 306 | |||
| 307 | z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); |
||
| 308 | tmp10 = z1 << (CONST_BITS+2); |
||
| 309 | |||
| 310 | /* Odd part */ |
||
| 311 | |||
| 312 | z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); |
||
| 313 | tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */ |
||
| 314 | z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); |
||
| 315 | tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */ |
||
| 316 | z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); |
||
| 317 | tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */ |
||
| 318 | z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); |
||
| 319 | tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ |
||
| 320 | |||
| 321 | /* Final output stage */ |
||
| 322 | |||
| 323 | wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2); |
||
| 324 | wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2); |
||
| 325 | } |
||
| 326 | |||
| 327 | /* Pass 2: process 2 rows from work array, store into output array. */ |
||
| 328 | |||
| 329 | wsptr = workspace; |
||
| 330 | for (ctr = 0; ctr < 2; ctr++) { |
||
| 331 | outptr = output_buf[ctr] + output_col; |
||
| 332 | /* It's not clear whether a zero row test is worthwhile here ... */ |
||
| 333 | |||
| 334 | #ifndef NO_ZERO_ROW_TEST |
||
| 335 | if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) { |
||
| 336 | /* AC terms all zero */ |
||
| 337 | JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) |
||
| 338 | & RANGE_MASK]; |
||
| 339 | |||
| 340 | outptr[0] = dcval; |
||
| 341 | outptr[1] = dcval; |
||
| 342 | |||
| 343 | wsptr += DCTSIZE; /* advance pointer to next row */ |
||
| 344 | continue; |
||
| 345 | } |
||
| 346 | #endif |
||
| 347 | |||
| 348 | /* Even part */ |
||
| 349 | |||
| 350 | tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2); |
||
| 351 | |||
| 352 | /* Odd part */ |
||
| 353 | |||
| 354 | tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */ |
||
| 355 | + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */ |
||
| 356 | + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */ |
||
| 357 | + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ |
||
| 358 | |||
| 359 | /* Final output stage */ |
||
| 360 | |||
| 361 | outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0, |
||
| 362 | CONST_BITS+PASS1_BITS+3+2) |
||
| 363 | & RANGE_MASK]; |
||
| 364 | outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0, |
||
| 365 | CONST_BITS+PASS1_BITS+3+2) |
||
| 366 | & RANGE_MASK]; |
||
| 367 | |||
| 368 | wsptr += DCTSIZE; /* advance pointer to next row */ |
||
| 369 | } |
||
| 370 | } |
||
| 371 | |||
| 372 | |||
| 373 | /* |
||
| 374 | * Perform dequantization and inverse DCT on one block of coefficients, |
||
| 375 | * producing a reduced-size 1x1 output block. |
||
| 376 | */ |
||
| 377 | |||
| 378 | GLOBAL(void) |
||
| 379 | jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, |
||
| 380 | JCOEFPTR coef_block, |
||
| 381 | JSAMPARRAY output_buf, JDIMENSION output_col) |
||
| 382 | { |
||
| 383 | int dcval; |
||
| 384 | ISLOW_MULT_TYPE * quantptr; |
||
| 385 | JSAMPLE *range_limit = IDCT_range_limit(cinfo); |
||
| 386 | SHIFT_TEMPS |
||
| 387 | |||
| 388 | /* We hardly need an inverse DCT routine for this: just take the |
||
| 389 | * average pixel value, which is one-eighth of the DC coefficient. |
||
| 390 | */ |
||
| 391 | quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; |
||
| 392 | dcval = DEQUANTIZE(coef_block[0], quantptr[0]); |
||
| 393 | dcval = (int) DESCALE((INT32) dcval, 3); |
||
| 394 | |||
| 395 | output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; |
||
| 396 | } |
||
| 397 | |||
| 398 | #endif /* IDCT_SCALING_SUPPORTED */ |